| Size (mm) | 50-150mm |
| Thread Size | 3/8 |
| No. of Holes | Side 3, Rear 4 |
| Flow Rate | 15L/min <300bar |
| Recommended Size | 16L, 30L |
| Description | The low-flow machine cleans the oil and fat on the wall of the pipeline |
| Size (mm) | 50-100mm |
| Thread Size | G1/8 |
| No. of Holes | Side 2, Rear 3 |
| Flow Rate | 30L/min <300bar |
| Recommended Size | 30L |
| Description | It is used to unclog pipes with a diameter of 100mm |
| Size (mm) | 50-110mm |
| Thread Size | 1/4 Quick Connect |
| No. of Holes | 0 |
| Flow Rate | 15L/min |
| Recommended Size | 16L |
| Description | Cuts the roots inside pipes or sewer line pipes |
| Size (mm) | 50-150mm |
| Thread Size | 3/8 |
| No. of Holes | Side 1, Rear 3 |
| Flow Rate | 30L/min <300bar |
| Recommended Size | 30L |
| Description | Knocks on the cement mortar and hard scale on the inner wall of the pipe |
| Size (mm) | 75-300mm |
| Thread Size | 3/8 - 1/2 |
| No. of Holes | Front 4, Rear 6 |
| Flow Rate | 40L/min <30bar |
| Recommended Size | 45L, 65L, 95L, 128L |
| Description | Cleans oil stains and soft sludge inside the pipeline |
| Size (mm) | 75-300mm |
| Thread Size | 3/8 - 1/2 |
| No. of Holes | Side 3, Rear 4 |
| Flow Rate | 40L/min |
| Recommended Size | 45L, 65L, 95L, 128L |
| Description | Dredges oil, tree roots, and concrete scabs inside pipelines (75-300mm in diameter) |
| Size (mm) | 75-400mm |
| Thread Size | 3/4 |
| No. of Holes | Front 1, Rear 2/4 |
| Flow Rate | 40L/min |
| Recommended Size | 45L, 65L, 95L, 128L |
| Description | Cleans the inner wall of the pipe without damaging it |
| Size (mm) | 75-300mm |
| Thread Size | M22 |
| No. of Holes | Side 3, Rear 6 |
| Flow Rate | 40L/min |
| Recommended Size | 45L, 65L, 95L, 128L |
| Description | Dredges oil stains on the inner wall of the pipe |
| Size (mm) | 75-400mm |
| Thread Size | M22 |
| No. of Holes | Side 3, Rear 6 |
| Flow Rate | 80L/min |
| Recommended Size | 95L, 128L |
| Description | Dredges oil and cement on the inner wall of the pipe |
| Size (mm) | 75-300mm |
| Thread Size | 3/8 |
| No. of Holes | Front 1, Rear 6 |
| Flow Rate | 40L/min |
| Recommended Size | 40L |
| Description | For general cleaning of pipelines |
| Size (mm) | 75-300mm |
| Thread Size | M22 |
| No. of Holes | Front 1, Rear 6 |
| Flow Rate | 60L/min |
| Recommended Size | 65L, 95L, 128L |
| Description | Wear-resistant, cost-effective nozzle ideal for grease and sludge removal, excellent traction and mobility in pipe flow. |
| Size (mm) | 100-400mm |
| Thread Size | 1" |
| No. of Holes | Front 0, Rear 6 |
| Flow Rate | 80L/min |
| Recommended Size | 65L, 95L, 128L |
| Description | Designed for general drain and sewer cleaning. The egg-shaped body passes through lined and unlined pipes with minimal snagging. With no forward jet and six rear thrust jets, it provides strong rear propulsion and effective scouring of deposits while reducing the risk of pipe wall damage. |
| Size (mm) | 100-400mm |
| Thread Size | 1" |
| No. of Holes | Front 1, Rear 6 |
| Flow Rate | 80L/min |
| Recommended Size | 65L, 95L, 128L |
| Description | For general cleaning of drains and sewers; egg-shaped body slides past deposits with minimal snagging. One penetrating front jet and six rear thrust jets deliver effective debris removal without damaging pipe walls. |
| Size (mm) | 75-300mm |
| Thread Size | 3/8" |
| No. of Holes | Front 1, Rear 2 |
| Flow Rate | 40L/min |
| Recommended Size | 45L, 65L, 95L, 128L |
| Description | Warthog rotating nozzle uses controlled-rotation jets to emulsify grease, shred roots, and clean the pipe wall while pulling effectively through bends and blockages. |
| Size (mm) | 75-300mm |
| Thread Size | 1/2" |
| No. of Holes | Front 1, Rear 6 |
| Flow Rate | 40L/min |
| Recommended Size | 45L, 65L, 128L |
| Description | Turbine nozzle removes oil deposits from pipes without damaging the pipe wall and can also cut through roots for complete cleaning. |
| Size (mm) | 75-300mm |
| Thread Size | 1"-3/8-1/2 |
| No. of Holes | Top 1, Side 3, Rear 5 |
| Flow Rate | 40L/min |
| Recommended Size | 45L, 65L, 95L, 128L |
| Description | Cleans oil stains, hard sludge blockages, and foreign matter compaction inside pipelines |
| Size (mm) | 75-300mm |
| Thread Size | M22 |
| No. of Holes | Side 3, Rear 6 |
| Flow Rate | 60L/min |
| Recommended Size | 65L, 95L, 128L |
| Description | Cleans oil stains inside pipelines, breaks up hard sludge blockages, and compacts/removes foreign matter. Designed for puncture action to penetrate and dislodge stubborn deposits while minimising damage to the pipe wall. |
| Size (mm) | 75-300mm |
| Thread Size | M22 |
| No. of Holes | Front 0, Rear 6 |
| Flow Rate | 60L/min |
| Recommended Size | 65L, 95L, 128L |
| Description | For general cleaning of drains and sewers — high-impact rear jets deliver strong scouring and propulsion to remove grease, sediment and light blockages without forward-penetrating jets. Optimised for consistent rear thrust and efficient debris removal while protecting the pipe wall. |
| Size (mm) | 150-500mm |
| Thread Size | M33×2 |
| No. of Holes | Front 0, Rear 8 |
| Flow Rate | 80L/min |
| Recommended Size | 95L, 128L |
| Description | Used for cleaning sediment, mud, bricks, and hard objects at the bottom of large pipelines. The nozzle’s high rear thrust efficiently moves heavy debris while maintaining effective forward progress and minimizing the risk of blockages. |
| Size (mm) | 75-300mm |
| Thread Size | 3/8"-1/2" |
| No. of Holes | Side 3, Rear 4 |
| Flow Rate | 40L/min |
| Recommended Size | 45L, 65L, 95L, 128L |
| Description | Designed for aggressive cleaning of pipelines, the Blasting King nozzle effectively removes oil stains, cuts through tree roots, and clears heavy debris. Its combination of side jets for powerful wall cleaning and rear jets for strong propulsion ensures thorough and efficient pipe restoration. |
| Thread Size | 3/8 or 1/2 |
| Applicable Pressure | 250-400 bar |
| Applicable Flow rate | 40-60lpm |
| Description | High-pressure nozzle for small pipes. Front rotation and rear 4 screw holes |
| Thread Size | 1/4 or 3/8 or 1/2 |
| Applicable Pressure | 150-350 bar |
| Applicable Flow rate | 20-70lpm |
| Description | High-pressure nozzle for small pipes. Front without back four pinholes |
| Thread Size | 1/4 or 3/8 or 1/2 |
| Applicable Pressure | 150-350 bar |
| Applicable Flow rate | 20-700lpm |
| Description | High-pressure nozzle for small pipes. Front without back four pinholes |
| Thread Size | 1/4 or 3/8 or 1/2 |
| Applicable Pressure | 150-350 bar |
| Applicable Flow rate | 60-100lpm |
| Description | High-pressure nozzle for small pipes. Side 4 screw holes and rear 6 screw holes |
| Thread Size | 1/2 |
| Applicable Pressure | 150-350 bar |
| Applicable Flow rate | 60-100lpm |
| Description | High-pressure nozzle for small pipes. Side 4 screw holes and rear 6 screw holes |
| Thread Size | 1/2 |
| Applicable Pressure | 150-350 bar |
| Applicable Flow rate | 60-150lpm |
| Description | High-pressure nozzle for small pipes. Rotate the rear four screw holes |
| Thread Size | 1/2 |
| Applicable Pressure | 150-350 bar |
| Applicable Flow rate | 60-150lpm |
| Description | High-pressure nozzle for small pipes. Front three and rear 6 screw holes |
| Thread Size | 1/2 |
| Applicable Pressure | 150-350 bar |
| Applicable Flow rate | 60-150lpm |
| Description | High-pressure nozzle for small pipes. Front one, back 6 screw holes |
| Thread Size | M27 |
| Applicable Pressure | 150-350 bar |
| Applicable Flow rate | 100-180lpm |
| Description | High-pressure nozzle for small pipes. Side 4 screw holes and rear 6 screw holes |
| Thread Size | 1/2 |
| Applicable Pressure | 150-350 bar |
| Applicable Flow rate | 60-150lpm |
| Description | High-pressure nozzle for small pipes. Rear six screw holes |
| Thread Size | M27 |
| Applicable Pressure | 150-250 bar |
| Applicable Flow rate | 80-180lpm |
| Description | High-pressure nozzle for small pipes. |
| Thread Size | 1/2 |
| Applicable Pressure | 150-350 bar |
| Applicable Flow rate | 60-150lpm |
| Description | High-pressure nozzle for small pipes. Rear 8 screw holes |
| Thread Size | 1/2 or M27 |
| Applicable Pressure | 150-350 bar |
| Applicable Flow rate | 60-150lpm |
| Description | High-pressure nozzle for small pipes. Rear 8 screw holes |
| Thread Size | 1/2 |
| Applicable Pressure | 150-350 bar |
| Applicable Flow rate | 128-300lpm |
| Description | High-pressure nozzle for small pipes. Rear 8 screw holes |